Hi guys, as it is frequently asked, here is the location of the ecu for the 2004-2007 Toyota Corolla. It might also be located in the same place in either earlier and later model years as well.
To take it out, you must remove the glove compartment by gently disengaging it. Also, 2 bolts at the bottom of the glove compartment must be removed along with plastic plugs in the same area at the bottom, that holds a plastic cover.
After that, all that remains are the 4 connectors of the ecu and a support point that the ecu has on its back, covered with a rubber piece. That support point is not tied to anything. Just to move it backwards will loosen it. The four connectors can be disconnected from the front, through the glove compartment hole. Just push the plastic clip of each connector with your thumb, while carefully pulling it back. Don’t worry about taking notes of connectors order, since each one will only fit on its right place.
Good lock guys.
Website's recent related searches: