Of course, this is a maximum. It may, and usually does, take less than this time.
Engine Control Module (ECM/ECU) for 2005 Toyota Sienna FWD with the 1MZ-FE, 3.3L V6 3MZ-FE engine, and automatic transmission (A/T). This ECM was refurbished, reprogrammed, and tested. This ECM fits the Sienna models with no immobilizer.
Your car’s VIN will be programmed before shipping if you include it when ordering this ECM. We provide a form at checkout for entering the VIN of your car.
TOYOTA PART# OF THIS ECM: 89661-08120
Exchangeable Part numbers that can be directly replaced with this ECM:
89661-08120
89661-08120 84
590-60816 (Hollander)
PROGRAMMING
This ECM is for the no-immobilizer models. No programming is needed. Plug and Play. The transmission control circuit was also programmed to ensure a smooth shifting of automatic transmission.
WHY BUYING FROM US
We offer quality items that are backed up with a great warranty. These ECMs are offered in many marketplaces, but they are not tested, nor are programmed for your car. You will get the best value on these ECMs when you buy from us.
IDENTIFYING THE PART NUMBER
The part number of your ECM is located on the label at the top of the ECM. An example is shown below. In this example, the part number is “89661-08120”
Please, before ordering, always make sure your actual ECM part number matches any of the exchangeable part numbers listed further above on this page which are 100% compatible.
APPLICATIONS
List of vehicle models that this ECM will fit on:
- 2005 Toyota Siena 3.3L, 6-Cylinders, 2WD 3MZ-FE engine, Automatic (A/T) transmission.
POSSIBLE SYMPTOMS
A bad ECM in the 2005 Toyota Sienna may cause any of numerous symptoms, but the most common are:
- The engine won’t start
- Transmission harsh shifting problems
- May give several error codes while all sensors check good
- Harsh engagement when put in reverse.
ECM LOCATION:
The 2005 Toyota Sienna engine ECM is located behind the glove compartment, at the right-hand area, as shown below.
Notes referring to common questions we receive:
- This is a direct replacement for the 2005 Toyota Sienna ECM for the V6, 2WD, 3.3L models.
- ECM (Engine Control Module) and ECU (Engine Control Unit) refers to the same part.
- No programming is needed for starting the engine.
- The warranty of this unit is specified at the top of this page.
- We ship worldwide.
- We ship through USPS and FedEx.
- We ship to PO Boxes and APO Boxes (military).
- Shipping to the USA through USPS Priority Mail is FREE.
- If you include your VIN when ordering, we will program it at NO extra cost for you.
- When installing, it is a good idea to disconnect the vehicle battery, but it is not a must.
- No core charges. You do not need to send back your old ECM as a core.
- This unit is the No-Security (No Immobilizer) version. This means that this is for the vehicles that do not use transponder keys (keys with a chip inside). If your vehicle uses the immobilizer system, you still may use this ECM but you will need to have it reprogrammed. You may also disconnect the immobilizer system as an alternative in order to use this ECM.
This is a refurbished product. It has been put back to factory functioning conditions and has been tested and made sure that it works as intended. In addition, a reasonable warranty has been included for the peace of mind of our customers.
The image(s) shown here is/are for reference and for identifying the product. The product you receive may vary slightly from the image shown here. Nevertheless, we always pick the best one we have available at the moment of shipping the order :)
Reviews
There are no reviews yet.