Mass Air Flow sensor / Airflow Meter / MAF for 2001-2010 Hyundai and Kia 2.5 and 2.7L models.
This unit’s part number is 74-10056 from Cardone.
The following are interchangeable (100% compatible) part numbers that this part replaces:
- Siemens 5WK9643Z
- 74-10056
- 86-10056
- 14900919-101
- 28164 37200
IMPORTANT:
- Always make sure your vehicle’s engine air filter is clean, as a dirty or clogged filter can cause similar problems.
- Clean the throttle and clean or replace the spark plugs after replacing a bad flowmeter to prevent temporary malfunction of the replacement part.
- You may need to reset your car with a scanner to erase the old trouble codes and check whether any codes persist.
- Do not use octane booster products. These products may harm sensitive electronic fuel injection systems, sensors, and parts.
Applications. The following are the vehicles this unit fits:
Hyundai (2001-2009):
2001-2006 Hyundai Santa Fe 2.7L V6
2001-2004 Hyundai Sonata 2.5L V6
2003-2008 Hyundai Tiburon GT and Coupe 2.7L V6
2005-2009 Hyundai Tucson 2.7L V6
Kia (2001-2010):
2001-2006 Kia Magentis 2.5L V6
2001 Kia Optima 2.5L V6
2002-2006 Kia Optima 2.7L V6
2005-20010 Kia Sportage 2.7L V6
If your vehicle’s flowmeter is failing, it may show different symptoms across models, but the symptoms are related. For example, the most common are:
-Noticeable lower fuel economy
-Black smoke or raw fuel smell from the exhaust
-The engine not starting or is hard to start
-If the engine starts, very rough idle
-Engine stalling or hesitation
-Uniform soot/carbon dry stain on all spark plugs
-A check engine code will be shown


The flowmeter measures the incoming air to the engine, so the ECM (Engine Control Module) can adjust the amount of fuel injected and maintain the ideal fuel/air mixture.
Are Flowmeters, MAF, and Mass Air Flow Sensors the same?
Yes, they refer to the same part. This is used in car engines to measure the amount of air entering the engine. The difference is that earlier designs measured incoming air by volume, while newer ones measure it by mass, which is more accurate for the ECM to know how much air is entering the engine at any moment.
This is a refurbished product. It has been put back to factory functioning conditions and has been tested and made sure that it works as new. In addition, a reasonable warranty has been included for the peace of mind of our customers.
Some images shown here will be for the only purpose of identifying the product, while in some other cases, the images are the actual product images. That been said, the product you receive may vary slightly from the images shown here. Nevertheless, we always pick the best and cleanest one we have available at the moment of shipping your order :)
TAGS: 74 10056, hyundai flowmeter, kia flowmeter



Read reviews left for us, or leave your own on Trustpilot! Available in the link below:
TechnicalDomain.net Reviews
You may also check our local reviews (left for us on our website):
Reviews
There are no reviews yet.