Engine Control Module (Also known as PCM, ECM, ECU, TCM, or TCU) for the 2005-2006 Jeep Wrangler with 2.4L engine and manual transmission (M/T). This ECM is “Plug and Play” with our FREE VIN number programming service.
Your vehicle mileage WILL NOT be affected by using this ECM.
This part will fit the following vehicles:
- 2006 Jeep TJ SE Sport Utility 2-Door 2.4L L4
- 2006 Jeep Wrangler SE Sport Utility 2-Door 2.4L L4
Hollander replacement#: 590-03153
This part will replace any of the following:
| 56044706 | 56044706AA | 56044706AB | 56044706AC | 56044706AD |
| 56044706AE | 56044706AF | 56044706AG | 56044707 | 56044707AA |
| 56044707AB | 56044707AC | 56044707AD | 56044707AE | 56044707AF |
| 56044707AG |
This unit has been refurbished, reprogrammed, and tested. We are also including the extra service of programming the VIN of your Wrangler to this ECM for FREE ($100 value), so it will be “plug and play”, meaning that you will only need to install it and it will be ready to use. No further programming is needed.
If you wish to take advantage of this free VIN programming service, just add your vehicle’s VIN in the form provided at checkout when ordering this ECM.
IMPORTANT:
IF YOU DO NOT INCLUDE YOUR VIN NUMBER, THE ECM WILL NOT START THE ENGINE UNTIL IT IS PROGRAMMED.
If you do not include the VIN when you order, we will try to contact you to ask for the VIN of your vehicle. If we cannot reach you for any reason, we will assume that you or your mechanic will program it, and we will ship the unit without programming the VIN. If the case is that you forgot to do it and we could not contact you, please send us a message with the VIN through our contact form on this website within 12 hours of ordering. After 12 hours, we cannot guarantee that the ECM is reachable, as it will probably already be shipped.
Please make sure that you send the correct VIN. Please double-check it.
Make sure that the part number of your car exactly matches any of the compatible part numbers listed here before ordering. If your vehicle is a 2005-2006 Jeep Wrangler 2.4L, manual, and your ECM has a different part number, please contact us first with the details before ordering so we can assist you and advise if this part is compatible.
Where is the ECM located in my Jeep Wrangler?
Below is shown the location of the Jeep Wrangler ECM. It is in the “firewall” at the left of the engine bay.

This is a refurbished product. It has been put back to factory functioning conditions and has been tested and made sure that it works as new. In addition, a reasonable warranty has been included for the peace of mind of our customers.
Some images shown here will be for the only purpose of identifying the product, while in some other cases, the images are the actual product images. That been said, the product you receive may vary slightly from the images shown here. Nevertheless, we always pick the best and cleanest one we have available at the moment of shipping your order :)
TAGS: 2006 jeep tj 2.4l l4, jeep wrangler 2.4l mt, jeep wrangler 56044706, jeep wrangler 56044707




Read reviews left for us, or leave your own on Trustpilot! Available in the link below:
TechnicalDomain.net Reviews
You may also check our local reviews (left for us on our website):
Reviews
There are no reviews yet.